Linksys Velop AC4400 Setup: A Comprehensive Guide

It is very difficult for router to provide a high speed internet to every corner of house, because a single router is not capable of providing internet over a large area. So here you need to use the Linksys AC400 mesh system. It provides high speed and reliable internet signals to every corner of your house. If you are also search for a best instruction that help you to complete Linksys velop ac4400 setup and configure process. Then read the methods given below:

Do Physical Setup

• The physical setup is very important, if you want to setting up the new Linksys velop mesh system.
• To setup devices physically, first settle the main router or main node along with the modem, and connect both of them with Ethernet cable.
• Then take the power adapter and give the power to the router with it. Ensure that the light is start blink on the router.
• When the light is turn to solid, then attach the child nodes with router via Ethernet cable or wirelessly.

Configure Mesh Devices via Linksys Mobile App

• After physically setup the mesh devices, it is very important to configure the mesh devices to connect devices wirelessly.
• To Linksys smart WiFi login, take a mobile phone and attach it to the default network of the main router. To do this, see the default network name on the label.
• When you will connect the mobile, then download and install the Linksys app on the mobile and open it clicking on it.
• Then it will ask for login, use the default login detail to login or create a new account via using the Email Id.
• After that click on the Login button, and scan the QR code present on the router’s label, to pair the devices.



• You can pair all the child nodes to the app, by following the same steps that given above.

Connect Child Node Wirelessly

• To connect child nodes wirelessly, place the child node close to the main router. And turn it on.
• Then press the sync or pair button of the router first. You can easily find the sync button on the back panel of router.
• After few seconds push the sync or pair button of the child node. Then you will see the light is starting blink on the node.
• When the light is turn to solid color, then move the child node to dead zone area. Ensure that place the child node within the range of main node.
• After that login to Linksys router or child nodes to configure all the child nodes with router.

Conclusion

After using all the above methods and steps, you can complete the Linksys velop AC4400 setup and configuration process at home. if you still have any issue, then speak to our customer support.