Why My Linksys Router Is Not Booting Up Upon Power Outage?
Linksys router connects with modem and modem connects with co-axial cable. Power fluctuation or power outage always effects on electronic devices that includes router, as well. There could be several reasons why your Linksys router is not booting up upon power outage. To try to fix this, use these troubleshooting steps:
Troubleshooting Tips
Following these tips will help you to boot up your Linksys router.
Power Cycle Your Linksys Router
After a power fluctuation, the router may occasionally require a manual restart to renew its components. You must first disconnect the router from the power supply and then give it a few minutes to rest. You must reconnect it to the router after a few minutes to see if it boots up properly.
Check Power Adapter
Make sure the power adapter is firmly inserted into the router and the wall outlet. If at all feasible, plug the power adapter onto a different outlet to test it. Power surges can occasionally harm the adapter. Try briefly switching out your compatible adapter to see if the router boots up.
Try Different Outlet or Surge Protectors
Certain outlets may occasionally experience power interruptions. If the router was previously linked to a surge protector, try connecting it into a new one or another outlet.
Look For Power Indicator Lights
Check the Linksys router red light or any other lights. The router can be stuck in a boot loop or unable to turn on completely if there are no blinking lights visible. When there is no additional activity and the power light remains steady, it may be a sign of an internal hardware problem.
Replace Linksys Router
If the router still doesn’t boot up, the power outage may have damaged internal components. Linksys support might suggest more diagnostic procedures or let you know whether repairs are feasible. Replacing the router might be the most economical course of action if it is old or severely damaged.
Check for Firmware Corruption
The router firmware may occasionally become corrupted by power outages. Linksys routers frequently provide a “recovery mode” for firmware reinstallation; for that login to Linksys router. A computer and the appropriate firmware download from the Linksys support website are all you need. Check the Linksys support website for the particular recovery steps for your model, since instructions differ.
Reset Your Linksys Router
Resetting the router is necessary if it still won’t boot up. First, find the reset button on the router’s back; it should be a tiny pinhole. Insert and hold this button for 10 seconds with a paperclip or pin, then let go and watch for the router to restart. By doing this, the router will return to its original factory settings. You have to configure Linksys router, again.
By following these steps; your problem about Linksys router is not booting up upon power outage will be resolved.
Conclusion
In short, we can say that there are many reasons behind Linksys router is not booting up upon power outages. But here we have shared the cause and fix with you to resolve your issue and by following these; you Linksys router will boot up.
